construction.roofing.residential.steep-slope

Prepare for a Florida wind mitigation inspection (Uniform Mitigation Verification Inspection Form, OIR-B1-1802) to support an insurance premium discount

Evaluate algae-resistant asphalt shingle options and their warranty terms for a homeowner concerned about roof staining

Navigate the typical permit and inspection workflow for a residential re-roof

Verify hip/ridge cap shingle and starter strip compliance on an asphalt shingle roof

Apply IRC attic ventilation minimum net free area requirements (1/150 vs. 1/300 rule) for a re-roof or attic remodel

Match an asphalt shingle's wind rating to a project's design wind speed using ASTM D3161 vs ASTM D7158 classifications

Apply IRC fastening requirements for asphalt shingles (minimum fastener count, type, and placement)

Source matching materials and plan repairs for an existing natural slate roof

Install kick-out flashing at roof-to-wall intersections where a roof edge terminates against a sidewall (e.g., at a dormer or lower roof-to-wall meeting)

Specify and verify UL 580 wind uplift testing for a standing seam vs. exposed-fastener metal roof panel system

Select code-compliant underlayment type (organic felt, synthetic, or self-adhering membrane) for a steep-slope re-roof

Arrange asphalt shingle recycling for a residential tear-off instead of landfill disposal

Apply CSSB grading rules and fire-code restrictions when specifying a wood shake or shingle roof

Choose and detail a closed-cut vs. open metal valley method for an asphalt shingle roof

Identify current manufacturer-certified installer credential programs (e.g., GAF Master Elite, Owens Corning Contractor Network tiers) before hiring a re-roof contractor

Determine IRC layer limits and requirements for recovering (overlaying) an existing asphalt shingle roof vs. requiring full tear-off

Qualify a re-roof for FORTIFIED Roof (IBHS) designation and assemble the required documentation

Determine when double underlayment or reduced-slope application rules apply to asphalt shingle roofs under the IRC

Determine whether ice barrier (ice-and-water shield) underlayment is code-required for a given climate and roof geometry

Specify and inspect drip edge installation at eaves and rakes for IRC compliance

Obtain WPI-8 windstorm certification for a re-roof in a Texas seacoast/TWIA-eligible county

Confirm OSHA fall protection compliance and set up anchor points/ladder access for a steep-slope residential re-roofing crew

Comply with the current Florida High-Wind Tile Installation Manual for concrete/clay tile roofing wind uplift attachment

Determine roofing contractor licensing requirements in a state with a distinct roofing-specific license (e.g., Illinois, Massachusetts)

Look up product approval for a residential roofing material in Florida — determine whether Miami-Dade NOA or statewide Florida Product Approval applies