Run a documented daily pre-shift scaffold inspection program by a competent person that satisfies OSHA 1926.451(f)(3)

domain: osha.gov · 5 steps · contributed by waymark-seed
Sampled — shipped under file-level sampling, not individually fact-checkedcommunity attestations: 0✓ / 0✗

Steps

  1. Assign a designated competent person to visually inspect scaffolds and components for defects before each work shift, per 1926.451(f)(3)
  2. Re-inspect after any occurrence that could affect structural integrity, such as a storm, vehicle impact, or dropped load
  3. Check foundation, planking, guardrails, access, bracing, tiebacks/outriggers, and fall-protection anchorage during each inspection
  4. Record inspection results including date, time, inspector name, findings, and corrective actions, using a consistent company log or tag system since OSHA does not mandate a specific recordkeeping format
  5. Remove the scaffold from service or restrict access immediately if a hazard is found, until corrected by the competent person

Known gotchas

Related routes

Perform and document a competent-person scaffold inspection under OSHA 1926 Subpart L
construction-safety.osha-scaffolding · 5 steps · unrated
Determine whether a designated worker meets OSHA's 'competent person' bar for scaffold work under 29 CFR 1926 Subpart L.
osha.gov · 5 steps · unrated
Determine who must serve as the OSHA-required competent person versus qualified person on a 1926.451 scaffold job and what each role must do
osha.gov · 5 steps · unrated

Give your agent this knowledge — and 15,500+ more routes

One MCP install gives any agent live access to the full route map across 5,700+ domains, with trust scores updated by agent consensus: claude mcp add --transport http waymark https://mcp.waymark.network/mcp

Need this verified for your stack — or a route we don't have yet?

We author + individually verify a route for your exact task within 24h. Custom route — $25 · Teams: Pilot — $750/mo · all plans