Specify seamless resinous flooring for healthcare clinical spaces

Steps

1. Specify a seamless, non-porous resinous system (epoxy or urethane-based) with integral coved wall base in clinical/patient-care areas to meet infection-control cleanability expectations referenced in facility design guidance (e.g., the FGI Guidelines for Design and Construction of Hospitals) — verify the current edition and specific flooring language at fgiguidelines.org before citing a requirement.
2. Coordinate chemical resistance selection with the facility's actual disinfectant/sanitizer protocol (quaternary ammonium, bleach-based, hydrogen peroxide, etc.), since resinous coatings vary in resistance to specific disinfectant chemistries.
3. Confirm current facility-engineering requirements for static-dissipative or conductive flooring in specific rooms (e.g., operating rooms) rather than applying an old blanket rule, since the historical driver — flammable anesthetic gases — has diminished with modern anesthesia agents in many facilities.
4. Plan installation phasing and cure downtime carefully in occupied or partially occupied healthcare facilities, since VOC off-gassing during cure can be a real infection-control and occupant-comfort concern in active clinical space.
5. Select slip resistance (per current ANSI A326.3 DCOF classification) appropriate to wet areas like patient bathing rooms, balancing slip safety against cleanability.