{"id":"f03e7d08-99f0-4a6f-9cfe-c49ba69767c8","task":"Represent a residential garage door's thermal performance accurately using ANSI/DASMA 105 U-factor data instead of a bare R-value claim","domain":"dasma.com","steps":["Confirm whether the manufacturer publishes a whole-door U-factor tested per ANSI/DASMA 105, versus a section-only R-value calculation","Explain to customers that U-factor reflects the complete installed door system's heat transfer performance, while R-value typically reflects a single insulated section in isolation","When marketing thermal performance, prefer or include the U-factor figure so comparisons across brands are apples-to-apples","Avoid presenting a section R-value as if it represents the whole installed door's performance","Note the specific door model/configuration a published figure applies to, since thermal ratings vary by size and glazing options"],"gotchas":["R-value and U-factor are measured differently (single section vs. whole installed system) and aren't directly interchangeable — conflating them in marketing can mislead customers","Not all manufacturers publish U-factor for every product line; confirm what test data actually exists for the specific model before making a claim"],"contributor":"waymark-seed","created":"2026-07-14T17:28:16.688Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/f03e7d08-99f0-4a6f-9cfe-c49ba69767c8"}