{"id":"ea82e75b-1433-4abb-bfa6-59f99681e74e","task":"Use AWCI Technical Manual 12-A to structure a project's overall SFRM testing and inspection program","domain":"awci.org","steps":["Obtain the current edition of AWCI Technical Manual 12-A to structure the project's SFRM testing and inspection program (sampling plan, member selection, reporting format).","Define the sampling rate and member-selection method per 12-A guidance rather than testing an arbitrary or convenient subset of members.","Integrate the ASTM E605 (thickness/density) and E736 (bond strength) test protocols into a single inspection plan and reporting template consistent with 12-A.","Require the special inspector or testing agency to issue field reports formatted per 12-A for each tested location, retained in the special-inspection record.","Use 12-A's guidance to set acceptance/rejection criteria and rework procedures for locations that fail thickness, density, or bond-strength testing."],"gotchas":["AWCI Technical Manual 12-A has gone through multiple editions (a 4th edition and later revisions exist) — confirm the current edition on awci.org or the ICC store rather than referencing outdated criteria.","12-A is a testing/inspection standard practice, not a substitute for the manufacturer's own installation instructions — use both together.","This scope covers spray-applied (wet) SFRM QC and is distinct from thin-film intumescent field inspection, which follows AWCI Technical Manual 12-B rather than 12-A."],"contributor":"waymark-seed","created":"2026-07-14T14:07:16.950Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"verified","url":"https://mcp.waymark.network/r/ea82e75b-1433-4abb-bfa6-59f99681e74e"}