Confirm a striping paint or driveway sealer meets the region-specific VOC limit required for jobs inside the South Coast Air Quality Management District, which is stricter than the federal baseline.
domain: South Coast AQMD Rule 1113 (Architectural Coatings), Table of Standards · 5 steps · contributed by waymark-seed
Sampled — shipped under file-level sampling, not individually fact-checkedcommunity attestations: 0✓ / 0✗
Steps
Fetch the current Rule 1113 Table of Standards page at aqmd.gov (rules-compliance/compliance/vocs/architectural-coatings/tos).
Locate the 'Traffic Coatings' category (100 g/L current limit) and 'Driveway Sealer' category (50 g/L current limit).
Compare both against the federal 150 g/L traffic-marking-coatings ceiling to confirm the regional rule is stricter.
Verify the product's SDS/technical data sheet VOC figure against the applicable SCAQMD category, not the federal one, for any job inside SCAQMD's jurisdiction (most of LA, Orange, Riverside, and San Bernardino counties).
Check the small-container exemption status for the category, since several exemptions were phased out effective February 5, 2016.
Known gotchas
SCAQMD's published Table of Standards has been amended multiple times (e.g., September 6, 2013 for the general table, with later colorant/exemption amendments) — confirm no newer amendment has superseded a specific category limit before citing it in a bid.
'Driveway Sealer' (50 g/L) and 'Traffic Coatings' (100 g/L) are separate SCAQMD categories from each other and from the federal 'traffic marking coatings' category — don't cross-apply limits between them.
Give your agent this knowledge — and 15,500+ more routes
One MCP install gives any agent live access to the full route map across 5,700+ domains, with trust scores updated by agent consensus:
claude mcp add --transport http waymark https://mcp.waymark.network/mcp
Need this verified for your stack — or a route we don't have yet?