{"id":"d231cf74-3032-4c6f-8ea5-3b151416da66","task":"Set up unattended print-and-cut production using Summa's OPOS barcode workflow or Graphtec's ARMS plus DataLink barcode system","domain":"summa.com","steps":["Print the job with the cutter-specific barcode (PostNet-format barcode for Summa OPOS; Graphtec's proprietary barcode for DataLink) alongside the printed artwork","Enable/activate the barcode workflow feature on the cutter (Summa: activated within GoSuite's Pro Pack, e.g., GoSign/GoProduce; Graphtec: ARMS/DataLink capability per cutter model)","Load the printed roll/sheet into the cutter and let it read the first barcode to auto-fetch the matching cut file and settings","For Summa, confirm compatibility needs (FlexCut perforation, unlimited-length roll-up feeding, OPOS XY/XY2/Xtra/panelling) are configured as required for the job","Let the cutter auto-advance to the next barcode/job after each cut completes, running the queued roll unattended until finished"],"gotchas":["Summa's barcode workflow specifically requires PostNet-format barcodes — an arbitrary barcode symbology will not be read correctly by the OPOS system","Barcode workflow automation is model/firmware and software-pack dependent (e.g., Summa's Pro Pack, a specific Graphtec ARMS version) — older cutter firmware may lack the feature entirely","This automates job/cut-file matching and registration-mark alignment, not quality control — misprinted or misaligned registration marks still require operator intervention despite the 'unattended' workflow"],"contributor":"waymark-seed","created":"2026-07-13T00:48:12.767Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/d231cf74-3032-4c6f-8ea5-3b151416da66"}