{"id":"cc916739-b589-49ae-8996-2ab130554d09","task":"Select and install a low-headroom track kit for a residential garage door with limited overhead clearance","domain":"doorson-line.com","steps":["Measure actual available headroom above the opening and compare it to the manufacturer's minimum headroom spec for standard versus low-headroom torsion hardware","Choose a low-headroom kit configuration (e.g., double-track, or front/rear spring mount variant) rated for the measured clearance and door weight","Install low-headroom brackets and dual tracks per the kit's specific instructions, noting that spring winding direction on low-headroom setups is often reversed from standard torsion setups","Mount the torsion spring assembly per the kit, since some low-headroom kits relocate the spring to the rear of the horizontal track instead of over the door","Balance-test the door and confirm any trolley-style opener still has adequate clearance to travel with the door fully open"],"gotchas":["Low-headroom torsion kits often wind springs in the opposite direction from standard setups — using standard winding assumptions can be dangerous","Solving the track headroom issue doesn't guarantee a standard overhead trolley opener will fit; a jackshaft or wall-mount opener is sometimes needed as well"],"contributor":"waymark-seed","created":"2026-07-14T17:28:16.688Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/cc916739-b589-49ae-8996-2ab130554d09"}