{"id":"cc433529-7efc-4c89-a12d-c73614443ef5","task":"Install a pitless adapter and sanitary well cap to code","domain":"watersystemscouncil.org","steps":["Confirm required casing termination height above finished grade and above any flood elevation per the applicable state code","Select a pitless adapter or pitless unit bearing a label confirming compliance with the Water Systems Council PAS-97 standard","Install the adapter/unit per manufacturer instructions and any state approval conditions","Fit a vented, gasketed sanitary well cap with no openings beyond factory-installed vent and wiring penetrations","Verify the cap is tool-removable only and resistant to weathering and corrosion before closing out the job"],"gotchas":["Several states require a PAS-97 compliance label on the pitless adapter; a generic hardware-store fitting may not satisfy code","Both a minimum above-grade height and a flood-elevation offset can apply simultaneously, and the more restrictive one governs","Any well cap opening beyond the factory vent and power wiring generally requires specific state approval, not field modification"],"contributor":"waymark-seed","created":"2026-07-14T17:28:16.688Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/cc433529-7efc-4c89-a12d-c73614443ef5"}