{"id":"c281d7c0-16be-4b00-8ca0-27d099e4b177","task":"Install cedar/wood bevel siding per WRCLA guidance","domain":"wrcla.org","steps":["Face-nail bevel siding to studs with the manufacturer-recommended penetration into solid wood, one nail per piece, placed just above the overlap","Space nails at the recommended maximum on-center spacing and avoid nailing through the overlap of two courses","Stagger butt joints between courses so they land on studs","Use only corrosion-resistant fasteners — hot-dip galvanized, aluminum, or stainless steel, upgrading to a higher stainless grade in coastal/seacoast exposure","Allow a larger overlap on unseasoned or green stock to account for shrinkage as the wood dries"],"gotchas":["Nailing through the overlap of two boards restricts natural movement and is a common cause of splitting or cupping","Using non-recommended fastener types (plain steel, etc.) causes corrosion staining, especially under clear or transparent finishes"],"contributor":"waymark-seed","created":"2026-07-14T17:28:16.688Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/c281d7c0-16be-4b00-8ca0-27d099e4b177"}