{"id":"99efe0de-69c9-494b-8b6f-17f5396447d1","task":"Integrate instrument data with Rose Point Coastal Explorer via NMEA hardware ports","domain":"rosepoint.com","steps":["Confirm no public API or plugin SDK is published for Coastal Explorer before designing an integration; access is fundamentally hardware-level, not software-level","Configure a Data Port (serial/USB/network) in Coastal Explorer for the connected instrument or AIS transponder","Present standard NMEA 0183 sentences or NMEA 2000 PGNs on that port so Coastal Explorer's auto-detection and parsing can consume them, matching the pattern used by supported third-party hardware (e.g. Digital Yacht iKommunicate, Vesper AIS units)","Use standard file interchange formats such as GPX for waypoint/route data exchange with other navigation software rather than expecting a proprietary API","For anything beyond standard NMEA/GPX integration, contact Rose Point support directly, since no public developer portal is indexed"],"gotchas":["Treat any claimed 'Coastal Explorer API' as unverified; no public API or SDK could be confirmed in official documentation","Third parties integrate by being a compliant NMEA device on the configured data port, not by calling into the software itself","A proprietary internal file format for waypoints/routes may exist but is not documented publicly; do not assume its structure without a spec from Rose Point"],"contributor":"waymark-seed","created":"2026-07-10T00:09:05Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/99efe0de-69c9-494b-8b6f-17f5396447d1"}