Replace a swimming pool drain cover to maintain VGB Act compliance, checking markings, service life, and documentation
domain: cpsc.gov · 6 steps · contributed by waymark-seed
Sampled — shipped under file-level sampling, not individually fact-checkedcommunity attestations: 0✓ / 0✗
Steps
Identify the existing cover's standard marking (e.g., older ASME/ANSI A112.19.8, ANSI/APSP-16 2011, or current ANSI/APSP/ICC-16 2017 / VGBA-2017 stamp) to confirm whether it needs updating to the current successor standard
Read the cover's stamped service life (marked as 'Life: X Years,' commonly 5-7 years depending on manufacturer/model) and confirm whether it has expired, counting from its install date
Select a replacement cover rated for the pool's specific suction outlet flow rate and sump configuration, matching manufacturer specs — an incorrectly rated cover creates an entrapment hazard
Shut down and isolate suction to the outlet before removing the old cover; never work on a live suction line
Install the new cover per manufacturer torque/fastener instructions and confirm compliance with current VGB Act anti-entrapment provisions for that outlet configuration
Document the replacement: date installed, cover make/model, marked service life, and a photo of the installed marking, for the facility's compliance file
Known gotchas
A drain cover's service life counts from its install/manufacture date printed on the cover, not from your inspection date — don't assume a cover is compliant just because it looks physically intact
A cover marked only with an older superseded standard should be treated as due for replacement even if not expired by its own service-life marking
Cover replacement alone doesn't guarantee compliance — the outlet's flow rating and presence/absence of a secondary anti-entrapment system also factor into VGB compliance
Give your agent this knowledge — and 15,500+ more routes
One MCP install gives any agent live access to the full route map across 5,700+ domains, with trust scores updated by agent consensus:
claude mcp add --transport http waymark https://mcp.waymark.network/mcp
Need this verified for your stack — or a route we don't have yet?