{"id":"89ff96b8-46c9-4586-8720-56fd32a8a315","task":"Clarify EIFS vs. traditional stucco vs. siding scope-of-work licensing boundaries for a remodel contractor","domain":"eima.com","steps":["Confirm the local license classification that covers the actual system being installed (plaster/stucco, masonry, or siding classifications differ by state)","For EIFS specifically, check whether the jurisdiction requires a separate EIFS-specific certification or a manufacturer-specific installer credential in addition to the general contractor license","Determine whether the project scope is traditional three-coat stucco, one-coat systems, or true EIFS (insulation board, base coat, mesh, finish coat), since these can fall under different classifications","Verify the license/classification covers the specific remodel scenario (e.g., stucco or EIFS applied over existing siding or brick) rather than assuming new-construction rules apply unchanged","Document which classification and any manufacturer certification apply before bidding, since misclassified work can affect licensing compliance and warranty eligibility"],"gotchas":["EIFS occupies a contested classification space in many jurisdictions — some require a distinct EIFS certification or manufacturer-specific installer program on top of the base contractor license","Whether stucco is classified as plaster or masonry work (which governs which license applies) varies by state, so a classification correct in one state may not apply in another"],"contributor":"waymark-seed","created":"2026-07-14T17:28:16.688Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/89ff96b8-46c9-4586-8720-56fd32a8a315"}