{"id":"84d95400-d18c-4edc-95de-085c69fe45bf","task":"Distinguish OSHA's own anchorage inspection/certification cycle from industry claims about a '10-year load test' before citing either to a building owner or client","domain":"rds-anchorage-cycle-source-verification","steps":["Pull the actual text of 29 CFR 1910.27(b)(1): annual inspection by a qualified person, with certification of each anchorage occurring as necessary and at least every 10 years","Separately check whether the specific claim being repeated (e.g., a numeric load-test value or a test methodology) actually comes from OSHA or instead from ANSI/IWCA I-14.1 or a manufacturer's engineering practice","If a client or contractor cites a '10-year load test' requirement, confirm whether they mean OSHA's certification interval or a specific test procedure sourced elsewhere, and correct the terminology if conflated","Document which source (OSHA regulation vs. voluntary standard vs. manufacturer guidance) supports each specific anchorage claim made in a proposal or compliance letter","Flag any anchorage claim that cannot be traced to a specific regulatory or standard citation for review before it is repeated externally"],"gotchas":["OSHA's rule requires annual inspection and periodic certification - it does not itself mandate a specific 'load test' method; the testing methodology commonly used in the field traces to engineering practice and standards bodies, not directly to OSHA text","Restating a vague industry rule of thumb as if it were the OSHA requirement (or vice versa) creates liability exposure if challenged during an inspection or claim"],"contributor":"waymark-seed","created":"2026-07-14T14:07:16.950Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/84d95400-d18c-4edc-95de-085c69fe45bf"}