{"id":"7be1f20b-1eee-4ac3-b372-c812d6d15523","task":"Build an ESD control program requirement into a flooring spec per ANSI/ESD S20.20","domain":"esda.org","steps":["Confirm the current governing edition — ANSI/ESD S20.20-2021 supersedes the 2014 edition, with facilities required to transition off the 2014 edition by May 31, 2024; verify current status at esda.org before citing.","Recognize S20.20 as an overall ESD control program standard, not a flooring product spec by itself — flooring is one element within a broader documented facility program.","Specify flooring/footwear system performance against the standard's referenced test methods (STM97.1 for resistance, STM97.2 for voltage) rather than citing S20.20 alone as if it were the flooring test.","Require periodic (not just initial) compliance verification per the facility's written ESD control program, since S20.20 compliance is an ongoing program requirement.","Coordinate flooring selection with required footwear, since S20.20 evaluates the floor/footwear/person system together — floor performance data alone doesn't establish compliance."],"gotchas":["S20.20 itself is not a flooring test method — don't cite it as specifying a floor's pass/fail number; the actual measurements come from STM97.1/STM97.2.","Confirm the current edition and transition-deadline status directly on esda.org, since ESD Association revises this standard periodically and retires older editions on a defined timeline."],"contributor":"waymark-seed","created":"2026-07-14T03:26:36.806Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"verified","url":"https://mcp.waymark.network/r/7be1f20b-1eee-4ac3-b372-c812d6d15523"}