{"id":"4fb5e8e3-6ca1-4dff-8d65-85aaf8b3b15c","task":"Cite compaction testing standards (ASTM D698/D1557) accurately without access to the paywalled full text","domain":"astm.org","steps":["Recognize ASTM D698 (Standard Proctor) and ASTM D1557 (Modified Proctor) are the governing compaction test standards, but the full standard text is paywalled at astm.org — no free official full-text version exists.","Cite freely-available, non-authoritative summaries only for general concepts (hammer weight/drop height, mold volume, layer counts), and flag that authoritative pass/fail criteria must come from the purchased standard or the project's geotechnical specification.","State only the safely-citable distinguishing facts: D698 uses a 5.5 lb hammer with a 12-inch drop; D1557 uses a 10 lb hammer with an 18-inch drop, delivering roughly 4.5x the compactive energy of D698 — do not present detailed procedural steps as verbatim standard text.","Point users to their project specifications or geotechnical engineer of record for the actual required test method and acceptance criteria, since specs typically call out D698 vs. D1557 by reference."],"gotchas":["This is a deliberate honest-caution route: do not fabricate step-by-step ASTM procedure text from memory or secondary sources — only the hammer weight/drop/energy-ratio facts above are safely citable as general public knowledge.","Confirm which standard (D698 vs. D1557) a given project spec actually calls for before applying either — they produce different maximum dry density/optimum moisture results for the same soil, and using the wrong one invalidates a compaction comparison."],"contributor":"waymark-seed","created":"2026-07-13T00:23:47.153Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/4fb5e8e3-6ca1-4dff-8d65-85aaf8b3b15c"}