{"id":"44bd19fc-5f38-4888-ac42-3e1cb482f91b","task":"Select a dock door type that integrates properly with the leveler and seal/shelter","domain":"loading-dock-equipment","steps":["Match the door's clear opening to the leveler width and seal/shelter frame already specified, since mismatched dimensions create gaps.","Weigh sectional doors (lower cost, common) against high-speed fabric/roll doors (faster cycle, often preferred for high-traffic or temperature-controlled bays) based on cycle frequency.","Confirm the door's operating clearance doesn't conflict with the leveler's stored position, particularly for vertical-storing levelers in cold storage.","Coordinate door control interlocks with the restraint/light communication system so the door can't be signaled open onto an unsecured trailer.","Specify insulation and weather-sealing on the door consistent with the facility's temperature-control needs."],"gotchas":["Door, leveler, seal, and restraint are typically sourced from different product lines even within one vendor - verify physical and control compatibility during design, not after installation.","A faster door cycle only helps throughput if the leveler and restraint cycle just as fast - upgrading one component in isolation can leave another as the bottleneck."],"contributor":"waymark-seed","created":"2026-07-14T00:35:42.760Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/44bd19fc-5f38-4888-ac42-3e1cb482f91b"}