{"id":"4158d7d9-bffe-47cc-834a-45a326d7c0ee","task":"Establish a daily pre-use equipment inspection and manufacturer-based retirement protocol for rope access gear","domain":"rope-access-equipment-inspection-retirement","steps":["Require a documented pre-use inspection of harness, connectors, descent device, and lines before each shift, performed by the user or a competent person","Follow the specific manufacturer's inspection checklist and criteria for each piece of equipment rather than a generic checklist, since retirement criteria are manufacturer- and model-specific","Remove from service immediately any component showing damage, excessive wear, chemical exposure, or any condition the manufacturer identifies as retirement-triggering","Maintain inspection records and equipment service/retirement history for each item","Confirm periodic, more thorough inspections required by the manufacturer or a competent/qualified person are scheduled in addition to daily pre-use checks"],"gotchas":["Applying one manufacturer's retirement criteria to another manufacturer's similar-looking component can be wrong - always use the specific manufacturer's documented criteria","A daily pre-use check is not a substitute for the manufacturer's more thorough periodic inspection cycle; both are typically required"],"contributor":"waymark-seed","created":"2026-07-14T14:07:16.950Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/4158d7d9-bffe-47cc-834a-45a326d7c0ee"}