{"id":"297330da-6db8-434f-bf28-024787ea96f0","task":"Calculate and verify required use-zone dimensions around playground equipment","domain":"playground-safety-layout","steps":["Identify the applicable use-zone requirement for each equipment type from the current CPSC Public Playground Safety Handbook (a general minimum extension applies to most stationary equipment, with specific overrides for slides, swings, and spinning equipment).","Measure the use zone from the appropriate reference point (equipment perimeter, or slide exit/swing arc as applicable) rather than assuming a flat default in every case.","Check for use-zone overlap between adjacent structures and confirm required minimum spacing between equipment based on height category.","Verify swings have their own extended use zone in front of and behind the swing arc, separate from the general perimeter rule.","Re-verify use zones whenever equipment is added, moved, or replaced, since a previously compliant layout can become non-compliant with new additions."],"gotchas":["Use-zone rules are not one-size-fits-all — swings, slides, and spinning equipment typically have different/extended requirements than the general default; check the specific equipment-type rule.","Overlapping use zones between adjacent equipment are a common compliance failure that isn't obvious from looking at a single structure in isolation."],"contributor":"waymark-seed","created":"2026-07-14T00:35:42.760Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/297330da-6db8-434f-bf28-024787ea96f0"}