{"id":"1ee4301d-f1d0-443a-98fe-fbbe52c74fd5","task":"Scope an operational-aid/load-moment-indicator (LMI) calibration check as part of a crane inspection company's annual comprehensive inspection under OSHA 1926.1416/1417","domain":"osha.gov","steps":["Fetch 29 CFR 1926.1416 (operational aids) and 1926.1417 (operation) text from osha.gov","Confirm the regulatory definition: a load moment indicator senses overturning moment (load x radius) and cuts power to load-increasing functions when rated capacity is reached","Confirm 1926.1417 requires operators to use a load weighing device, LMI, rated capacity indicator, or rated capacity limiter to determine if a lift exceeds 75% of maximum rated capacity at the working radius","Note that OSHA's Subpart CC text located in this research did not specify a numeric calibration interval or tolerance for LMI devices — check the manufacturer's manual and any applicable ASME B30.5/B30.3 provisions for calibration frequency rather than asserting an OSHA-mandated interval","Document calibration verification (date, method, reference load) as part of the annual comprehensive inspection record"],"gotchas":["Do not assert a specific OSHA-mandated LMI calibration interval unless it is confirmed directly in the current CFR text — the sections reviewed describe functional requirements for operational aids, not a fixed calibration schedule","LMI calibration requirements are more commonly driven by the crane manufacturer's manual or ASME B30-series guidance than by a standalone OSHA calibration mandate — cite the correct source rather than conflating the two"],"contributor":"waymark-seed","created":"2026-07-14T03:26:36.806Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/1ee4301d-f1d0-443a-98fe-fbbe52c74fd5"}