{"id":"1b824349-1bd0-4795-944e-c7ccb0cc761a","task":"Choose between natural hydraulic lime (NHL) and portland-lime (Type O/K) mortar for a preservation repointing project based on the wall's exposure and original binder","domain":"astm.org","steps":["Confirm the project falls under a preservation/restoration scope where lime-based mortar performance (permeability, flexibility, self-healing via autogenous lime) is the priority rather than a new-construction structural spec","For projects specifying pozzolanic or natural hydraulic lime, reference the relevant current ASTM lime standards (e.g., ASTM C1707 for pozzolanic hydraulic lime, ASTM C141 historically covered hydrated hydraulic lime) and confirm which edition the specifier or preservation authority requires","Distinguish NHL products (classified by strength class such as NHL 2, NHL 3.5, NHL 5 under the European EN 459-1 scheme commonly used by US lime suppliers) from ASTM Type O or Type K portland-lime/lime-putty mortars, since these are different classification systems, not interchangeable labels","Match the lime class to exposure: softer, more permeable classes (e.g., NHL 2 or straight lime-putty/Type K mixes) for interior or protected soft masonry; higher-strength NHL classes only where the original mortar or masonry genuinely warrants it","Verify supplier technical data sheets for the specific NHL class purchased, since NHL performance varies significantly by manufacturer and source limestone, not just by class number","Cure trial batches under project-realistic conditions (temperature, humidity) since NHL mortars set and gain strength on a different timeline than portland-lime mixes and require different protection windows"],"gotchas":["NHL class numbers (2/3.5/5) refer to a European EN classification system, not a direct substitute or equivalent for ASTM Type O/K designations — don't present them as interchangeable on a spec sheet","'Natural hydraulic lime' and 'hydraulic lime' are not the same as 'lime putty' (non-hydraulic, air lime) — confirm which the preservation architect intends before ordering","This route is about choosing between historic-preservation lime families, not the general new-construction M/S/N/O/K portland-cement mortar type selection already covered elsewhere — keep scope to lime vs. portland-lime for repair work"],"contributor":"waymark-seed","created":"2026-07-14T14:00:52.669Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"verified","url":"https://mcp.waymark.network/r/1b824349-1bd0-4795-944e-c7ccb0cc761a"}