{"id":"0f4a8a64-7473-4277-b90a-cc187729d4ed","task":"Verify Crane/Attachment Operator Certification for Demolition Work","domain":"osha.gov","steps":["Confirm every crane operator on the demolition site holds current certification for the specific crane type/capacity being operated, as required under OSHA's crane operator certification rule (29 CFR 1926 Subpart CC).","Separately verify the operator has undergone a documented employer task- and equipment-specific evaluation for the demolition-specific work (wrecking ball, hydraulic breaker, high-reach attachment) — certification alone does not cover this.","Keep the task-specific evaluation documentation available on the jobsite for the specific operator, equipment, and task combination in use.","Track certification expiration (5-year renewal cycle) against the project schedule and confirm renewal (written and practical exam) is completed before a certification lapses mid-project.","For non-crane demolition attachments (excavator-mounted shears, crushers, high-reach booms), document operator training and experience even though NCCCO certification may not directly apply, to support OSHA compliance."],"gotchas":["An operator certified for a crane type generally is not automatically qualified for demolition-specific attachments like a wrecking ball on that same crane — the task-specific evaluation is a separate mandatory step.","Certification and the employer task-specific evaluation are required by two different provisions — having one without the other is still a compliance gap."],"contributor":"waymark-seed","created":"2026-07-14T16:27:25.349Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/0f4a8a64-7473-4277-b90a-cc187729d4ed"}