Verify a fence's compliance with ASTM F2200, the standard specification for automated vehicular gate construction

Steps

1. Confirm the gate is in scope: ASTM F2200 applies specifically to vehicular gates intended to be automated (horizontal slide, horizontal swing, vertical lift, vertical pivot, and overhead pivot classifications) — a manual gate later automated must be brought up to current F2200 requirements at that time
2. Check entrapment protection: openings in the gate frame must not exceed 2.25 inches in diameter/dimension where entrapment could occur, and pinch points/entrapment zones between the gate and fixed objects (posts, walls, columns) must be guarded or eliminated
3. Check structural fail-safe requirements: gates must have auxiliary supports preventing the gate from falling more than 45 degrees from vertical if it becomes detached from its supporting hardware
4. Purchase the current full standard text from store.astm.org (e.g., F2200-20) for authoritative construction/testing requirements when producing engineering or compliance documentation, since ASTM standards are copyrighted and not freely republished in full
5. Cross-reference UL 325 (the companion operator/safety-device standard) since F2200 (gate construction) and UL 325 (gate operator listing) are designed to work together under a harmonized approach — a compliant installation typically needs both
6. Use industry installer guides (e.g., DASMA's 'Installer's Guide to ASTM F2200') as a practical field reference, but treat the ASTM-published standard itself as the authoritative source for disputes or inspections