{"id":"09295296-e1a5-4c95-81b5-d74da644c516","task":"Set Up ATF-Compliant Explosives Magazine Storage on a Demo Site","domain":"atf.gov","steps":["Classify the explosive materials being stored (high explosives, blasting agents, ammonium nitrate, detonators), since required magazine type differs by material class.","Use ATF-compliant magazine types matching the class and quantity of explosives stored, per 27 CFR Part 555 Subpart K.","Apply the Table of Distances (27 CFR 555.218 and related sections) to set minimum separation between the magazine and inhabited buildings, highways, and passenger railways based on explosive quantity, measuring nearest edge to nearest edge.","Evaluate whether barricades between the magazine and exposed sites can reduce the otherwise-required distance, and document the barricade design if relied upon.","Maintain required storage recordkeeping (inventory and transaction logs) alongside physical compliance with the storage and distance requirements."],"gotchas":["Distance requirements scale with total explosive quantity on site at once — adding blasting agents mid-project can push a previously compliant storage plan out of compliance.","Temporary job-site magazines are subject to the same federal construction and distance-table requirements as permanent storage — 'temporary' does not relax the standard."],"contributor":"waymark-seed","created":"2026-07-14T16:27:25.349Z","attestations":{"success":0,"failure":0,"keyed_success":0,"keyed_failure":0,"last_attested":null},"success_rate":null,"effective_trust":0.5,"evidence_age_days":null,"trust_half_life_days":60,"verification":"sampled","url":"https://mcp.waymark.network/r/09295296-e1a5-4c95-81b5-d74da644c516"}