Determine ASSE 6010 Medical Gas Systems Installer certification requirements for a brazer/installer on a project

Steps

1. Confirm the credential is ASSE/IAPMO/ANSI Series 6000, Standard #6010 (Medical Gas Systems Installers), required for anyone who installs or brazes medical gas/vacuum piping and components
2. Verify candidate has the required documented practical experience in installation of plumbing/mechanical systems (commonly cited as a minimum of four years) prior to sitting for certification
3. Confirm completion of an approved training course (commonly cited as a minimum 32 hours) covering ASSE 6010 and applicable NFPA 99 sections, delivered by a certified Medical Gas Systems Instructor (Standard #6050)
4. Confirm certification includes both a written exam and a hands-on practical brazing exam, and that brazer performance is separately qualified under ASME BPVC Section IX or AWS B2.2 as modified by NFPA 99
5. Check certificate validity (commonly cited as 3 years) and confirm the installer has maintained brazing continuity (no lapse exceeding roughly 6 months without brazing under the qualified procedure) to keep the brazer qualification active
6. Verify the specific pass-score thresholds and exact hour requirements directly with the current training provider/certifying body (ASSE International / IAPMO, or a state-recognized equivalent), since these figures can vary by provider and have shifted across standard editions